Nokta-detectors Fors Tech Manuel d'utilisateur télécharger pdf (Page 13)

The menu screen allows you to access all the FORS Tech settings. You can go to the menu

screen by pressing one of the up/down/+/- switches while on the main screen and adjust

the settings of the device. Now let's take a look at these settings:

MODE:

FORS Tech has 4 predefined search modes based on ground conditions and target type.

During your search, you can select one of these modes and quickly personalize its settings

in the menu if you want to.

The names of the search modes are abbreviated as GEN, DI2, DI3 and COG. Please read the

SEARCH MODES section for more details on modes (see pages 15-16).

SENSITIVITY:

It is the detection depth setting that controls the gain of the device. It is used to eliminate

the electromagnetic interference signals received from the surrounding environment as

well as ground noise.

Each mode has its own default sensitivity value in the menu. When you change the mode,

the sensitivity value preset for that mode is displayed. This does not aect the sensitivity

levels set by the user in other modes. For ideal settings and detailed information please

refer to the SENSITIVITY and THRESHOLD settings (page 21).

Sensitivity level can be adjusted from 1 to 99. The most ideal sensitivity level for each mode

has been preset by the factory. Sensitivity level may be changed manually when needed.

THRESHOLD:

Threshold is used to increase the target signals and thus the detection depth of the device.

In General Search mode, it adjusts the audible level of the constant background hum. For

more details on threshold, please refer to the SENSITIVITY and THRESHOLD settings

(page 21).

ID MASKING:

When the search coil passes over a target, if the target signal is strong enough, a 2-digit

target ID will be displayed on the numeric display as well as the LCD panel. Target ID ranges

from 0 to 99. Target ID is a number produced by the detector based on a target's

conductivity and it gives you an idea about what the target may be.

ID Masking is the ability of the detector to ignore (not produce a warning tone or ID)

unwanted metals or mineralized rocks.

SENSITIVITY

THRESHOLD

MODE GEN

ID MASKING

DEVICE INTRODUCTION

FORS / Page 11www.noktadetectors.comNOKTA DETECTORS

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Pas de commentaire

Nokta-detectors Fors Tech Manuel d'utilisateur Page 13